Lens Accessories

  • Bartech Wireless Focus

    • Bartech Wireless Focus

      Features:

      • 900 MHz Data Transmission, 8 Selectable Sub-channels
      • Rotary Style Control Module That Can Lock Together to Other Units For Multichannel Operation (Focus unit shown)
      • Interchangeable 1 Channel Receiver/Amplifier Modules, each with Remote Camera Run Outputs
      • 12-bit Resolution with All 12-bits Always Available
      • Fast, Simple One-Pass Manual Lens Calibration
      • Control Modules Powered by an Inexpensive 9V Battery (18 hours of operation)
      • Direct Potentiometer Input to Receiver/Amp for Servo-type Operation, or Direct Connect Transmitter to Receiver (Hard Wire)
      • Automatic Standby Battery Saver Mode & Low Battery Indicator
      • Automatic Motor Shut Down to Save Power
  • Metabones Canon EF to Sony NEX Speed Booster

  • P+S Technik Pro 35 Adapter

    • P+S Technik Pro 35 Adapter

      P+S Technik Pro 35 Adapter, B4 Mount to PL Mount.

      Features:

      • Camera Mount: B4 Mount
      • Lens Mount: PL Mount
      • Tuning for Shooting Sensor: Back focus
      • Frame Position: Upright, Emulsion side up
      • PRO35 Relay Lens: Built-in iris for light reduction (no effecet on depth of focus)
      • Ground Glass Frequency Eccentric: Variable Speed
      • Current Consumption: 300mA / 12v
      • Power Supply: Via lens connector cable
      • Length: 162mm
      • Weight: 4.85 lbs
      • Operating Temperature: 0-50°c
  • Fujinon ACM-21

    • Fujinon ACM-21

      The Fujinon ACM-21 is a lens adapter for the 1/2″ CMOS chip PMW-EX3 camcorder. This adapter allows the 1/2″ chip camera to utilize high quality 2/3″ Fujinon lenses using the B4 mount. Broadcast lenses used with 2/3″ HD cameras feature optics and image depth that is at a much higher quality than lenses designed for 1/2″ camcorders. The upgrade in lens quality will upgrade the image to levels unprecedented in the 1/2″ chip realm.
  • Sony VCL-EX0877

    • Sony VCL-EX0877

      The Sony 0.8x Wide Conversion Lens allows you to increase the field of view on the Sony PMW-EX1, EX1R, EX3 and PMW-200.

      Features:

      • Mount: Bayonet Mount
      • Magnification: 0.8x
      • Lens Diameter: 3.6"
      • Length: 1.5"
      • Weight: 10.6oz. / 300g
  • Metabones Canon EF to Sony E Mark IV

    • Metabones Canon EF to Sony E Mark IV

      The T Smart Adapter Mark IV for Canon EF or Canon EF-S Mount Lens to Sony E-Mount Camera from Metabones allows a Canon EF or EF-S mount lens to be mounted onto a Sony E-mount camera. While doing so, the adapter is designed to support electronic communication between an attached camera and lens. If the lens includes autofocus, image stabilization, as well as camera-controlled aperture functions, this adapter is intended to allow those features to be used. If an attached lens is also capable of generating EXIF metadata when used with a directly compatible camera, the T Smart Adapter Mark IV for Canon EF or Canon EF-S Mount Lens to Sony E-Mount Camera is designed to allow that information to be saved along with image files generated with a combination of the lens, a Sony E-mount camera, and the adapter.
  • Wooden Camera Sony E to PL Pro

    • Wooden Camera Sony E to PL Pro

      E-Mount to PL Adapter Pro (A7s) is a shimmable Sony E-Mount to PL mount adapter that enables mounting of all PL mount lenses onto the Sony A7, A7r, and A7s cameras as well as FS100 and FS700. Mount includes a foot which attaches the PL mount directly to the base of the body and allows for attaching to a tripod directly eliminating strain on the camera.
  • Preston Micro Force (analog)

  • Preston Micro Force (digital)